[SEAT] [Ibiza 6J] VAG-COM - VCDS 2016/2017

[rikhartman]

Omdat ik een 'modern' overzicht van de VCDS mogelijkheden van de Ibiza 6P 2016/2017 mis en de bestaande losse threads graag zou willen bundelen, heb ik de vrijheid genomen om een nieuwe verzameltopic aan te maken.

Ik heb zelf een lange lijst gevonden die ik ook test, gezien de lengte gebeurt dat in stapjes.
Alle (hopelijk) bijdragen zal ik in de openingspost bundelen. Als de lijst wat meer vorm krijgt is het voor de leesbaarheid beter om naar een geordend PDF bestand te linken, eerst maar kijken of hier animo voor is!
Gezien de limitatie van 10240 tekens, reserveer ik alvast 4 plekken onder de openingspost ;-)

Heb je een functie/aanpassing getest? Graag doorgeven dan vink ik 'm af.
De vertalingen zijn soms ook heel krom, deze wil ik ook geleidelijk aan vertalen, elke hulp is welkom.

Geteste, werkend bevonden, functies zijn groen gemarkeerd!
Testauto:
Ibiza FR CONNECT 2016


De aftrap:

Categorie SERVICE

• Reset service cycles
  With this mod you can reset the maintenance service notification.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptations
  3 - Select - PIM: Restart prolog.interv.mant
  4 - Select one of three options:
  - No warning (default)
  - Active Notice
  - Reset
  Another way:
  1 - Applications
  2 - Inspection service reset
  3 - Select the desired
  
  
• Change notice review by KM
  With this mod you can reset the warning maintenance service for kilometers.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select
  4 - Fixed: Next m?x.hasta mileage rev.en kil function.
  5 - Change the desired value. Default 30000
  6 - FIXED: resposic value. Pr?x.inspecc. Depending on the mileage
  7 - Change to the desired value. Default 30000
  8 - PIM maximum value of KM-delivery kilometric / review
  9 - Change the desired value. Default 30000
  10 - PIM: minimum value of km-long sandy provision / review
  11 - Change the desired value. Default 15000
  12 - SIA: value m?x.de journey to service
  13 - Change the desired value. Default 15000
  
  
• Change days notice review
  With this mod you can reset the maintenance service notice for days.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select
  4 - Fixed: Time m?.hsta next rev. Depending on the time
  5 - Change the desired value. 730 default d
  6 - FIXED: reposic.pr?x inspecc.en value function of time
  7 - Change to the desired value. Default 365 d
  8 - PIM maximum value of elapsed time between overhauls
  9 - Change the desired value. 730 default d
  10 - PIM: minimum value of elapsed time between overhauls
  11 - Change the desired value. Default 365 d
  12 - SIA: value longer up service
  13 - Change the desired value. Default 365 d
  

Categorie GELUIDSSIGNALEN / WAARSCHUWINGSGELUIDEN

• Activate Alarm Free
  No installation required. Suitable for all vehicles without standard alarm. Vehicles without alarm installed. It only monitors doors, bonnet and trunk.
  1 - Module 09 - Electronic control unit. Code (31347)
  2 - Extended coding (bytes)
  3 - Byte 12
  4 - Activate Bit 0 (Anti-theft system installed / active)
  5 - Adaptation
  6 - Submenu - Anti-theft protection
  7 - DWA Alarmverzoegerung (Change value to "door contact thatcham driver")
  8 - DWA Camper Modus (Change value to "enabled")
  9 - Ueberwachung Innenentriegelungshelbel (Change value to "activated")
  10 - Akustischer Alarm Signalhorn (Change value to "enabled")
  11 - Submenu - Answer Signals
  12 - Akustische Rueckmeldung global (Change value to "enabled")
  13 - Akustische Rueckmeldung Signalhorn (Change value to "activated")
  
  Note that once we leave the vehicle, the alarm is activated after a few seconds, so if the
  We want to try to wait a few seconds and then open the door from the inside (with the window open, for
  example). Lock the car while inside, and after about 30 seconds open the door and
  The alarm goes off, it switches off or gives the contact or the remote control giving it to open.
  
  
• Disable beep when you open a door with ignition on
  With this mod the warning beep gives to have the ignition and open the driver's door or other doors off.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select - On active message, exciter
  4 - Select one of three options:
  - Driver's door (default)
  - All doors
  - No indication
  
  
• Beep / alarm when locking and unlocking the car
  With this mod you may have to close, open or in both cases with horn beep occurs.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Signs response
  4 - Sub - Akustische rueckmeldung entriegeln --- On
  5 - Sub - Akustische rueckmeldung verriegeln --- On
  6 - Sub - Global rueckmeldung --- On Akustische
  7 - Sub - Akustische rueckmeldung Signalhorn --- On
  8 - Sub - Menuesteuerung Akustische rueckmeldung --- On (On Screen Display)
  9 - Sub - Dauer der vom akustischen rueckmeldung einfachhorn --- Normal (No alarm) or Kurz (with alarm)
  
  
• Different beeps Seatbelt
  With this mod you can change warning sounds coming from the factory classic American (Various acute Ding and pause)
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding (Text mode)
  3 - Select - Notice for the use of seat belts
  4 - Select one of the options:
  - Option 1 (default)
  - Variant 2
  - Off

Categorie MULTIMEDIA

• Input gain control RADIO FM, AM, DAB, SAT
  With this mod you can change the antenna gain.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Amplify audio input Management Generation 2
  4 - Change desired values ​​- By default -128db
  
  
• Hide / Show band RADIO AM
  Lately almost all Lions come without the AM band active. With this mod you'll enjoy it.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Extended Coding (Text mode)
  3 - Byte 14 AM Disable
  4 - Select between two options:
  - Enabled (default) The hidden
  - Not activated (Sample)
  
  
• Adjusting the microphone sensitivity
  If you think your microphone not also catches your voice, you can make it more responsive making this mod.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Microphone Sensitivity
  4 - Change the desired value. Default 0 db
  
  
• Enable / Disable eject CD / DVD
  With this mod you can unlock or lock the eject button on the CD / DVD
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Key CD ripping
  4 - Select one of the two options:
  - Unlocked (default)
  - Locked
  
  
• Enable AUX IN (USB + AUDIO MODULE)
  With this mod you can activate or deactivate the AUX input (Pin Jack next USB)
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Extended Code (Text mode)
  3 - Byte 8 AUX-IN
  4 - Select one of the two options:
  - On (default)
  - Off
  
  
• USB input change behavior
  With this mod you can change the behavior of USB, IPOD, or just Full load mode even disable it.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Extended Code (Text mode)
  3 - Byte 19 USB
  4 - Select one of four options:
  - USB-IPOD (default)
  - Off
  - Charge
  - Full
  
  
• Add external sources
  With this mod you can add several USB
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Interface for external media activation
  4 - Select one of four options:
  - Connection 1
  - Connection 2
  - Connection 3
  - Connection 4
  

Categorie AIR CONDITIONING / VERWARMING

• More cold in the cooler
  With this mod 30% more cold in the climate control is achieved.
  1 - Module 08 - Electronic air conditioning / heating
  2 - Extended Coding (Text)
  3 - Temperature Adjustment
  4 - Change value: Set colder func.refrig
  
  
• Show climate control fan speed with LEDs in AUTO mode
  As you know, in manual mode the speed segments are led us indicating the fan speed, however they are not automatic. With this mod the it'll also show in automatic mode.
  1 - Modulo 08 - Air conditioning / heating electronics
  2 - Extended coding (bytes)
  3 - Byte 8
  4 - Activate Bit 0
  
  
• Heating time of the windscreen
  With this mod, you can change the time that warming in the front window is active.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Heating crystals
  4 - Sub - Running time of heated front window
  5 - Change value to 240s
  
  
• Heating time of the rear window
  With this mod, you can change the time that warming in the rear window is active.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Heating crystals
  4 - Sub - Heckscheibenheizung zeitwert
  5 - Change value to 600 s
  
  
• Automatic activation for wind defrost
  With this mod, to start the car if the conditions are right cold start the air conditioner blowing the windscreen defrosting default.
  1 - Module 08 - Electronic air conditioning / heating
  2 - Adaptations
  3 - Select - Activa. Autom. Calefacc. Windshield deicing MAX
  4 - Change value to On
  
  
• Modify grades warning of possible danger ice
  With this mod, you can change temperatures warning of possible danger of ice.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select - Outside temperature
  4 - Search option - P exit temperature ice warning
  5 - Modify the desired value: 6 ? C Default
  6 - Search option - P ice warning entry temperature:
  7 - Modify the desired value: 4 ? C Default
  
  
• Heating Mirrors and Windows in Case Of Freeze
  Select Control unit 09 (Central Electrics)
  Control unit Long Coding
  Byte 14
  Bit 3-Bit 4 Activate

 

[rikhartman]

Categorie SPIEGELS / WISSERS / RUITEN

• Disabling comfort windows opening from the door lock
  With this mod we can deactivate that they go down and that they raise the windows with the key in the door lock.
  It is very interesting because it has been proven that in some cases with any key of the group can be lowered and open windows by turning it in the lock.
  In no case with a key other than the car opens, but we have also detected that if it can be closed.
  1 - Module 09 - Electronic control unit. Code (31347)
  2 - Adaptation
  3 - Access control 2 - Options (Various values)
  4 ------ Schliesszylinder komfort oeffnen - Options (Activated - Inactive)
  5 ------ Schliesszylinder komfort schliessen - Options (Activated - Inactive)
  
  
• Semi-automatic folding and unfolding mirrors
  With this mod, holding down the button on the remote can fold or unfold the mirrors to lock or unlock the car.
  1 - Electronic control module 09-. Code (31347)
  2 - Adaptation
  3 - Select - Control Access 2
  4 - Sub - Funk modus spiegelanklppung
  5 - Change value via remote control Convenience key opeation
  Hold the button to fold or unfold
  
  
• Klap spiegels automatisch in bij vergrendeling. (Zowel via AB als sleutel in deur) getest: 2016 model
  Met deze aanpassing klappen de spiegels automatisch in bij het vergrendelen van de auto. Als je via AB vergrendelt, hoef je de vergrendelknop niet ingedrukt te houden.
  Gebruik deze functie icm onderstaande functie, zodat je tijdens vrieskou de spiegels spaart.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Control Access 2
  4 - Sub - Funk modus spiegelaklappung
  5 - Verander waarde By command via remote control look key
  
  
• OPTIE IN BOORDCOMPUTER: Automatisch inklappen van de spiegels bij vergrendelen aan/uit getest: 2016 model
  Met deze aanpassing kies je via de boordcomputer of automatisch inklappen van de spiegels aan- of uitstaat.
  1 - Module 09 - Electronic control unit. Code (31347)
  2 - Adaptation
  3 - Select - Access control 2
  4 - Submenu - Menuesteuerung funk spiegel anklappen - Options (Inactive - Activated)
  5 - Verander waarde naar On
  De menuoptie is nu zichtbaar in het CAR-setup menu.
  
  
• Opening and closing the windows comfort
  With this modification will get the opening and closing windows in comfort mode.
  1 - Electronic control module 09-. Code (31347)
  2 - Adaptation
  3 - Select - Control Access 2
  4 - Sub - Comfort opening
  5 - Change value to Active
  6 - Sub - Menuesteuerung konfortbedienung einstellbar
  7 - Change value Adjustable
  8 - Sub - Funk konfort oeffnen
  9 - Change value to Active
  10 - Sub - SAD konfort oeffnen
  11 - Change value to Active
  12 - Sub - Comfort closing
  13 - Change value to Active
  14 - Sub - Funk konfort schliessen
  15 - Change value to Active
  16 - Sub - SAD konfort schliessen
  17 - Change value to Active
  
  
• Activate windows with running even opening the doors so they do not stop
  With this mod, the windows work even with the doors open.
  1 - Electronic control module 09-. Code (31347)
  2 - Adaptation
  3 - Select - Functions assist light
  4 - Select - Control Access 2
  5 - Sub - FH Freigabenachlauf bei tueroeffnen abbrechen
  6 - Change value to On
  
  
• Permanently disable comfort rear wiper system
  If you do not like that every time you back up the rear wiper is started with this mod you can disable it.
  1 - Electronic control module 09-. Code (31347)
  2 - Adaptation
  3 - Select - wiper
  4 - Sub heck -Traenenwischen
  5 - Change value on off
  
  
• Rear wiper setting in the menu
  This mod adds more function in the menu of the clean. You can choose to or not activate the automatic rear clean.
  1 - Electronic control module 09-. Code (31347)
  2 - Adaptation
  3 - wiper
  4 - Menuesteuerung konfortwischen HW
  5 - Change value to On
  

Categorie INTERIEURVERLICHTING

• Lighting intensity leds AACC / Climate
  With this mod, you can change the intensity of illumination in the area of ​​climate control.
  1 - Module 08 - Electronic air conditioning / heating
  2 - Adaptation
  3 - Select - Dimming_characteristic_2 (LED indicator)
  4 - Change value Y4 21%
  5 - Select - Dimming_characteristic_3 (LED fan)
  6 - Change value Y4 12%
  7 - Select - Dimming_characteristic_5 (Other LEDs)
  8 - Change value Y4 10%
  
  
• Ambient light blank door with reverse -> denk alleen voor LEON?
  With this mod, carrying the doors in red, when putting the reverse gear will go blank.
  1 - Module 09 - Electronic control unit. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte16BLK SLB35BLK SL KC9
  4 - Submenu - Lichtfunktion G 16
  5 - Change value to R?ckfahrlicht
  6 - Select - Leuchte16BLK SLB35BLK SL KC9
  7 - Submenu - Dimmwert GH 16
  8 - Change value to 0
  9 - Select - Leuchte16BLK SLB35BLK SL KC9
  10 - Submenu - Dimming direction GH 16
  11 - Change value to Minimize
  12 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
  13 - Submenu - Lichtfunktion C 17
  14 - Change value to R?ckfahrlicht
  15 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
  16 - Submenu - Dimmwert CD 17
  17 - Change value to 127
  18 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
  19 - Submenu - Dimming direction CD 17
  20 - Change value to Maximized
  
  NOTE: Leuchte 16 is the red light (0 and minimized = 127 and maximized) and Leuchte 17 is white light (0 and minimized = 127 and maximized)
  
  
• Ambient door light with flashing and color change -> denk alleen voor LEON?
  With this mod, bringing the doors in red, when flashing, the door on the side of the indicator flashes between red and white.
  1 - Module 09 - Electronic control unit. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte16BLK SLB35BLK SL KC9
  4 - Submenu - Lichtfunktion C
  5 - Change value to Blinken links (beide Phasen) BOTH SIDES OF INTERMITTENT or Blinken links (Hellphase) ONLY WITH INTERMITTENT LEFT
  6 - Select - Leuchte16BLK SLB35BLK SL KC9
  7 - Submenu - Dimmwert CD
  8 - Change value to 0
  9 - Select - Leuchte16BLK SLB35BLK SL KC9
  10 - Submenu - Dimming direction CD
  11 - Change value to Minimize
  12 - Select - Leuchte16BLK SLB35BLK SL KC9
  13 - Submenu - Lichtfunktion E
  14 - Change value to Blinken rechts (beide Phasen) BOTH SIDES OF FLASHLIGHTS or Blinken rechts (Hellphase) ONLY WITH RIGHT INTERMITTENT
  15 - Select - Leuchte16BLK SLB35BLK SL KC9
  16 - Submenu - Dimmwert EF
  17 - Change value to 0
  18 - Select - Leuchte16BLK SLB35BLK SL KC9
  19 - Submenu - Dimming direction EF
  20 - Change value to Minimize
  21 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
  22 - Submenu - Lichtfunktion A
  23 - Change value to Blinken links Hellphase
  24 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
  25 - Submenu - Lichtfunktion B
  26 - Change value to Blinken rechts Hellphase
  
  
• Enable indicator Rear fog
  With this modification we can visualize in the box snitch when we put the rear lights.
  1 - Module 09 - Electronic. Code (31347)
  2 - Extended coding (Mode Bytes)
  3 - Byte 7
  4 - Enable Bit 4
  

 

[rikhartman]

Categorie BUITENVERLICHTING

• Turn off the daytime running lights (DRL) with the parking brake
  This modification is very interesting because it allows us to leave day lights (DRL) off while we have the hand brake with and without contact. Very useful in low battery.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Daytime Running Light
  4 - Sub - Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
  5 - Change value to ON
  
  
• Turn off daytime running lights (DRL) with light selector switch in position 0
  This change is also very interesting because it allows you to leave the day off lights while wearing the light switch in zero position. It is compatible with the previous one.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Daytime Running Light
  4 - Sub - Tagfahrlicht nur in Schalterstellung AUTO
  5 - Change value to ON
  
  
• Eliminate error LED lamps on the license plate
  If you are thinking of putting leds on the license plate, this will avoid modification of the Fis you notice defective bulb.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte25KZL HA59
  4 - Sub - Lasttyp 25
  5 - Change value Allgemeine LED. 2 * default 5W
  6 - Select - Leuchte25KZL HA59
  7 - Sub - Dimmwert AB 25
  8 - Change value to 127. Default 100
  
  
• Remove error by mounting of LED lamp in front fog lamps
  If you are thinking of putting LED on the front lights, with this modification you will avoid the mistake of bulb failure.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte13NL RB5
  4 - Sub - Lassttyp 13
  5 - Change value LED Lichtmodul
  6 - Sub - Dimmwert AB 13
  7 - Change value to 127
  8 - Select - Leuchte12NL LB45
  9 - Sub - Lassttyp 12
  10 - Change value LED Lichtmodul
  11 - Sub - Dimmwert AB 12
  12 - Change value to 127
  
  
• Change number of flashes of intermittent comfort
  Very interesting for those who believe that comfort intermittent mode fall short with 3 flashes. The maximum value is 5 blinks.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Control of intermittent
  4 - Sub - Komfortblinken blinkzyklen
  5 - Change to the desired value - Maximum 5
  6 - Reset factory settings on the screen lights Car
  
  
• OPTIE IN BOORDCOMPUTER: Activeer/deactiveer dagrijverlichting (DLR) via CAR-setup menu
  Met deze aanpassing kun je dagrijverlichting schakelen via het CAR-setup menu.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Daytime Running Light
  4 - Sub - Tagfahrlichtnur Aktivierung oder durch BAP Bedienfolge moeglich
  5 - Verander waarde naar ON
  
  
• Long flash burst together with the fog lamps
  With this change each time you press the burst in the lights of your car, will light while the front fog lights.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte12NL LB45
  4 - Sub - Lichtfunktion c 12
  5 - Change value to Left high beam
  6 - Select - Leuchte12NL LB45
  7 - Sub - Dimmwert DC 12
  8 - Change value to 100
  9 - Select - Leuchte12NL LB45
  10 - Sub - D 12 Lichtfunktion
  11 - Change value to Lichthupe generell
  12 - Select - Leuchte12NL LB45
  13 - Sub - Dimming direction DC 12
  14 - Change Value to Maximize
  15 - Select - Leuchte13NL RB5
  16 - Sub - Lichtfunktion c 13
  17 - Change value Right high beam
  18 - Select - Leuchte13NL RB5
  19 - Sub - Dimmwert CD 13
  20 - Change value to 100
  21 - Select - Leuchte13NL RB5
  22 - Sub - D 13 Lichtfunktion
  23 - Change value to Lichthupe generell
  24 - Select - Leuchte13NL RB5
  25 - Sub - Dimming direction CD 13
  26 - Change Value to Maximize
  
  
• Activate front fog lamps when reversing
  With this mod, when engaging reverse the front fog lights come on.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - static cornering light
  4 - Sub - Bei rueckwaertsfahrt
  5 - Change value to OFF
  
  
• Deactivate the interior light when opening the trunk
  With this change we will make the interior lights of the cabin is not light up when opening the boot.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Interior lighting
  4 - Sub - Innenlicht bei offenem heckdeckel einschalten
  5- Change value to Off
  
  
• Enable third brake light when you open the trunk
  With this modification, the third brake light turns on when you open the trunk.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte22BR MA57
  4 - Sub - Lichtfunktion C 22
  5 - Change value to Heckdeckel Offen
  6 - Sub - Dimmwert CD 22
  7 - Change value to 100
  
  
• Footrest Light
  This modification is for those who have the light of the footrests and put it on your own, be activated.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte30FR LC72
  4 - Sub - Lichtfunktion E 30
  5 - Change value to Interior Light
  
  
• Enable DRL on front fog lamps
  With this modification the fog lights will come on together with the DRL to carry on.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte12NL LB45
  4 - Sub - Lichtfunktion B 12
  5 - Change value Daytime Running Lights
  6 - Select - Leuchte13NL RB5
  7 - Sub - Lichtfunktion B 13
  8 - Change value Daytime Running Lights
  
  
• DRL intensity (Halogen and Bi-Xenon Basic)
  With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte4TFL LB4
  4 - Sub - Dimmwert AB 4
  5 - Change the desired value. Default 100
  6 - Select - Leuchte5TFL RB32
  7 - Sub - Dimmwert AB 5
  8 - Change to the desired value. Default 100
  127 maximum allowed
  
  
• DRL intensity lights dimmed mode (Halogen and Bi-Xenon Basic)
  With this modification the DRL is gradually attenuated in the switching on and off.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte4TFL LB4
  4 - Sub - Dimmwert EF 4
  5 - Change the desired value. By default 40
  6 - Select - Leuchte5TFL RB32
  7 - Sub - Dimmwert EF 5
  8 - Change to the desired value. By default 40
  127 maximum allowed
  
  
• Intensity lights DRL LED lights
  With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte2SL VLB10
  4 - Sub - Dimmwert CD 2
  5 - Change the desired value. Default 26
  6 - Select - Leuchte3SL VRB21
  7 - Sub - Dimmwert CD 3
  8 - Change to the desired value. Default 26
  127 maximum allowed
  
  
• Flashing DRL Simultaneous with bi-xenon headlights Basic
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte4TFL LB4
  4 - Sub - Lichtfunktion C4
  5 - Change value to Not active
  6 - Select - Lichtfunktion C 5
  7 - Change value to Not active
  
  
• Flashing lights DRL with LED simultaneous
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte2SL VLB10
  4 - Sub - Lichtfunktion G 2
  5 - Change value Blinken links Dunkphase
  6 - Select - Leuchte2SL VLB10
  7 - Sub - Dimmwert GH 2
  8 - Change to the desired value
  9 - Select - Leuchte2SL VLB10
  10 - Sub - Dimming direction GH 2
  11 - Change value to Minimize
  12 - Select - Leuchte3SL VRB21
  13 - Sub - Lichtfunktion G 3
  14 - Change value Blinken links Dunkphase
  15 - Select - Leuchte3SL VRB21
  16 - Sub - Dimmwert GH 3
  17 - Change the desired value
  18 - Select - Leuchte3SL VRB21
  19 - Sub - Dimming direction GH 3
  20 - Change value to Minimize
  
  
• Activate Coming & Leaving Home in fog lights
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Lighting comfort
  4 - Sub - Coming home leuchten
  5 - Change value to Fog light
  
  
• Enable fog cornering (cornering function)
  If your car does not carry activated the fog lights turn on curves, with this modification you can activate this feature.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte12NL LB45
  4 - Sub - D 12 Lichtfunktion
  5 - Change value to Abbiegelicht links
  6 - Select - Leuchte12NL LB45
  7 - Sub - Dimming direction DC 12
  8 - Change Value to Maximize
  9 - Select - Leuchte12NL LB45
  10 - Sub - Dimmwert DC 12
  11 - Change value to 100
  12 - Select - Leuchte13NL RB5
  13 - Sub - D 13 Lichtfunktion
  14 - Change value to Abbiegelicht rechts
  15 - Select - Leuchte13NL RB5
  16 - Sub - Dimming direction CD 13
  17 - Change Value to Maximize
  18 - Select - Leuchte13NL RB5
  19 - Sub - Dimmwert CD 13
  20 - Change value to 100
  
• Zie volgende post voor vervolg

 

[rikhartman]

Categorie VERVOLG BUITENVERLICHTING

• Regulation of lights or turn corner
  With this modification you can change the speed at which you want them to act the cornering. By default come to 40 km / h.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - static curve light
  4 - Sub - Untere geschwindigkeitsschwelle
  5 - Change the desired value
  6 - Sub - Obere Geschwindigkeitsschwelle
  7 - Change value to 60. Default 40 Km / h
  
  
• Turn off lights or turn corner
  With this modification you can disable cornering function.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte12NL LB45 (Left)
  4 - Sub Lichtfunktion B 12
  5 - Change value to Not Active
  6 - Select - Leuchte13NL RB5 (Right)
  7 - Sub Lichtfunktion B 13
  8 - Change value to Not Active
  
  
• Automatic activation Coming & Leaving Home
  With this modification the Coming and Leaving Home system is automatically activated.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Lighting comfort
  4 - Sub - Coming home verbaustatus
  5 - Change value to Automatic
  
  
• Activate Coming Home without light rain sensor
  If you do not have rain sensor you can also activate the Coming Home with this modification.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Lighting comfort
  4 - Sub - Coming Home Verbaustatus
  5 - Change value to Automatic
  6 - Sub - Menueeinstellung cominghome
  7 - Change default value 20.Por 10 s
  8 - Sub - Coming home Einschaltereignis
  9 - Change value to Driver door
  10 - Sub - Menuesteuerung coming home Werkseinstellung
  11 - Change value to On
  12 - Sub - Coming home leuchteng
  13 - Change value Low beam
  
  
• Coming Home & Leave Home - Include cornerings
  With this modification you can include the cornerings to coming home and leave home.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte8FL LB39
  4 - Sub - Lichtfunktion H8
  5 - Change value to leaving home Coming home oder aktiv
  6 - Select - Leuchte8FL LB39
  7 - Sub - Dimming direction GH 8
  8 - Change Value to Maximize
  9 - Select - Leuchte8FL LB39
  10 - Sub - Dimmwert GH 8
  11- Change value to 100
  12 - Select - Leuchte9FL RB2
  13 - Sub - Lichtfunktion H9
  14 - Change value to leaving home Coming home oder aktiv
  15 - Select - Leuchte9FL RB2
  16 - Sub - Dimming direction GH 9
  17 - Change Value to Maximize
  18 - Select - Leuchte9FL RB2
  19 - Sub - Dimmwert GH 9
  20 - Change value to 100
  
  
• Coming Home & Leave Home alone DRL, without beam (Halogen / XENON)
  With this modification, only the DRL will be active in the Coming and Leaving Home.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte6ABL LC5
  4 - Sub - Lichtfunktion C6
  5 - Change value to leaving home Coming home oder aktiv
  6 - Select - Leuchte6ABL LC5
  7 - Sub - Dimming direction CD 6
  8 - Change value to Minimize
  9 - Select - Leuchte6ABL LC5
  10 - Sub - Dimmwert CD 6
  11 - Change the desired value
  12 - Select - Leuchte7ABL RB1
  13 - Sub - Lichtfunktion C 7
  14 - Change value to leaving home Coming home oder aktiv
  15 - Select - Leuchte7ABL RB1
  16 - Sub - Dimming direction CD 7
  17 - Change value to Minimize
  18 - Select - Leuchte7ABL RB1
  19 - Sub - Dimmwert CD 7
  20 - Change the desired value
  
  
• Coming Home & Leave Home with LED DRL Lights + Xenon
  With this modification DRL + Xenon + fog lights are active in the Coming and Leaving Home.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Lighting comfort
  4 - Sub - Coming home leuchten
  5 - Change value to Fog lights
  6 - Select - Leuchte12NL LB45
  7 - Sub - Lichtfunktion E 12
  8 - Change value oder Coming Home Leaving home Aktiv
  9 - Select - Leuchte12NL LB45
  10 - Sub - Dimmwert EF 12
  11 - Change the desired value
  
  
• Coming Home & Leave Home also third brake light
  With this modification, the third brake light is active in the Coming and Leaving Home.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte22BR MA57
  4 - Sub - Lichtfunktion B 22
  5 - Change value to leaving home Coming home oder aktiv
  
  
• Coming Home & Leave Home also inside. LED drivers
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte27NSL RC6
  4 - Sub - Lichtfunktion B 27
  5 - Change value to leaving home Coming home oder aktiv
  
  
• Coming Home & Leave Home also inside. NO LED drivers
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte24SL HRA65
  4 - Sub - Lichtfunktion B 24
  5 - Change value to leaving home Coming home oder aktiv
  6 - Select - Leuchte23SL HLC10
  7 - Sub - Lichtfunktion B 23
  8 - Change value to leaving home Coming home oder aktiv
  
  
• Activate Coming Home to open the driver's door
  With this modification, the Coming Home can be activated when you open the driver's door.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Lighting comfort
  4 - Sub - Coming home Einschaltereignis
  5 - Change value to Drivers door
  
  
• Parking light position also inside. NO LED Car drivers CLOSED
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte23SL HLC10
  4 - Sub - Lichtfunktion H 23
  5 - Change value to Parklicht links
  6 - Select - Leuchte23SL HLC10
  7 - Sub - Dimming direction GH 23
  8 - Change Value to Maximize
  9 - Select - Leuchte23SL HLC10
  10 - Sub - Dimmwert GH 23
  11 - Change value to 28
  12 - Select - Leuchte24SL HRA65
  13 - Sub - Lichtfunktion H 24
  14 - Change value Parking light right
  15 - Select - Leuchte24SL HRA65
  16 - Sub - Dimming direction GH 24
  17 - Change Value to Maximize
  18 - Select - Leuchte24SL HRA65
  19 - Sub - Dimmwert GH 24
  20 - Change value to 28
  
  
• Parking light position also inside. Car LED drivers CLOSED
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte27NSL RC6
  4 - Sub - Lichtfunktion B 27
  5 - Change value Parking light right
  
  
• Fog lights with Cornering together to put intermittent
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - static cornering light
  4 - Sub - Vorschrift
  5 - Change value to FMVSS 517 108. By default ECE R119
  
  
• Activate tail light (gate) to open the trunk. (LED Drivers)
  With this modification to open the trunk, lights that go in the gate will light ..
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte23SL HLC10
  4 - Sub - HD Lichtansteuerung AB 23
  5 - Change value to Always
  6 - Select - Leuchte24SL HRA65
  7 - Sub - HD Lichtansteuerung AB 24
  8 - Change value to Always
  
  
• Activate tail light (gate) to open the trunk. (LED Drivers)
  With this modification to open the trunk, lights that go in the gate will light ..
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte26NSL LA72
  4 - Sub - HD Lichtansteuerung AB 26
  5 - Change value to Always
  6 - Select - Leuchte27NSL RC6
  7 - Sub - HD Lichtansteuerung AB 27
  8- Change value to Always
  
  
• Schakel LED-achterlichten mee aan bij dagrijverlichting (DLR)
  Met deze aanpassing schakelen de LED-achterichten automatisch mee aan bij inschakelen DLR-verlichting.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Daytime Running Light
  4 - Sub - Tagfahrlicht dauerfahlicht aktiviert zusaetzlich standlicht
  5 - Verander waarde naar On
  
  
• Activate rear fog with the trunk open. (No LED Drivers)
  With this modification we can make the rear fog lights turn on when you open the trunk.
  1 - Module 09 - Electronic
  2 - Adaptation
  3 - Select - Leuchte26NSL LA72
  4 - Sub - HD Lichtansteuerung AB 26
  5 - Change value to Always
  
  
• Red light in all driving modes
  With this modification, the lights of the doors will always be red in all driving modes.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte17TFL SRB3TFL R R BLK BLK SR KC3
  4 - Sub - Lichtfunktion A 17
  5 - Change value to Off
  6 - Select - Leuchte16BLK SLB35BLK SL KC9
  7 - Sub - Lichtfunktion B 16
  8 - Change value to environmental Luz 3
  
  
• DRL against appr phase with Bi-Xenon front lights and Halogen
  With this modification you can make do the following: When the flashing light DRL are off and when the indicator is off the DRL light. It is very cool.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte4TFL LB4
  4 - Sub - Lichtfunktion C4
  5 - Change Value Not active
  6 - Select - Leuchte4TFL LB4
  7 - Sub - Dimmwert GH 4
  8 - Change to the desired value
  9 - Select - Leuchte4TFL LB4
  10 - Sub - Lichtfunktion G 4
  11 - Change value Blinken links hellphase
  12 - Select - Leuchte4TFL LB4
  13 - Sub - Dimming direction GH 4
  14 - Change value to Minimize
  15 - Select - Leuchte5TFL RB32
  16 - Sub - Lichtfunktion C 5
  17 - Change Value Not active
  18 - Select - Leuchte5TFL RB32
  19 - Sub - Dimmwert GH 5
  20 - Change the desired value
  21 - Select - Leuchte5TFL RB32
  22 - Sub - Lichtfunktion G 5
  23 - Change Blinken value rechts hellphase
  24 - Select - Leuchte5TFL RB32
  25 - Sub - Dimming direction GH 5
  26 - Change value to Minimize
  
  
• Against Stage lights DRL with LED lights appr Forward
  With this modification you can make do the following: When the flashing light DRL are off and when the indicator is off the DRL light. It is very cool.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte2SL VLB10
  4 - Sub - Lichtfunktion G 2
  5 - Change value Blinken links Hellphase
  6 - Select - Leuchte2SL VLB10
  7 - Sub - Dimmwert GH 2
  8 - Change to the desired value
  9 - Select - Leuchte2SL VLB10
  10 - Sub - Dimming direction GH 2
  11 - Change value to Minimize
  
  
• Rear lights flashing in sequence mode (LED Drivers)
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Select - Leuchte16BLK SLB35BLK SL KC9
  4 - Sub - Lichtfunktion A 16
  5 - Change value Blinken links Hellphase
  6 - Select - Leuchte17TFL SRB3TFL R R BLK BLK SR KC3
  7 - Sub - Lichtfunktion A 17
  8 - Change value Blinken links Hellphase
  

 

[rikhartman]

Categorie BESTUURDER HULPSYSTEMEN

• Sensitivity hill start assistant
  We can modify the way the wizard acts hill start adapting to our needs or habits.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Adaptation
  3 - Select - Start Assist slope
  4 - Activate one of the three options:
  - Normal (default)
  - Advance
  - Time delay
  
  
• Tilt hill start assistant
  With this modification we can change when we want to be activated depending on the steepness of the slope.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Adaptation
  3 - Select - Start Assist slope, slope limit
  4 - Change the value you want.
  A higher value more inclination required for activation
  Default 3%
  
  
• Disabling pending Support Assistant
  With this modification we can cancel the pending help system.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Extended Coding
  3 - Byte 16
  4 - Enable Bit 0
  
  
• Expanded XDS electronic differential lock
  We may change the way it works, you can choose between several values ​​in a way that best suits our driving.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Adaptation
  3 - Select - Electronic Differential Lock Expanded
  4 - Activate one of the five options:
  - Standard (default)
  - Central
  - Not activated
  - Weak
  - Strong
  
  
• ESP depending on the speed
  Applying this modification can activate the ESP function acting on the speed that take the vehicle or the value is always fixed.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Adaptation
  3 - Select - Electronic Stability Program
  4 - Select one of the two options:
  - Activation function of speed
  - Not enabled (default)
  - Activated
  
  
• ESP multimode -> Ik krijg het niet werkend, byte 29 bestaat niet, gaat tot 25 bij mij.
  Applying this modification can have multiple ESP and ASR options depending on how we program.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Extended Coding (byte mode)
  3 - Byte 29
  4 - Bits 0.1 and 2 Activated shows: Activated - ASR disabled - ESP off.
  5 - Bit 1 Enabled shows: Activated - ASR deactivated
  5 - Bit 2 On shows: Activated - ESC disabled
  6 - Bits 1 and 2 shows Activated: Activated - Sport ESC - ESC disabled
  7 - Bits 0 and 3 On displays: - On - ASR disabled - ESC Sport.
  
  
• Disable ESP and ASR
  With this modification permanently dasactiva the ESP. I do not recommend it, I do not like.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Basic Settings
  3 - Select - Deactivation ESP and ASR
  4 - Select one of the two options:
  - Not enabled (default)
  - Activated
  
  
• Activate the warning of speeding and at what speed
  With this modification you can activate the speed warning and at what speed. It can be done on the screen.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding
  3 - Byte 0
  4 - Enable Bit 6
  Another way :
  1 - Adaptation
  2 - Select - Speed ​​Warning
  3 - Select one of the two options:
  - Activated
  - Off (default)
  4 - Change value in kilometers per hour to the desired
  
  
• Enable Display Driver Profiles at Startup
  If your car is driving profiles, with this mod, every time you boot it will show in the FIS how you are without having to look at the screen.
  1 - Module 19 - diagnosis interface for data bus. Code (20103)
  2 - Extended Coding (byte mode)
  3 - Byte 8
  4 - Activate bit 4
  
  
• Direct Acceleration - Throttle response
  With this mod, you can change the behavior of the accelerator. Option B provides a more linear acceleration without sudden deliveries.
  1 - Module 44 - Power steering. Code (UNKNOW)
  2 - Adaptation
  3 - Select - switching driving profile
  Choices :
  A - Gradual, controlled by time
  B - Directly controlled threshold value
  
  
• Driver Profile - Driving Modes
  With this mod, you can change the behavior of the car, in dynamic mode behaves somewhat more cheerful in the reactions.
  1 - Module 44 - Power steering. Code (UNKNOW)
  2 - Adaptation
  3 - Select - Lines features power steering
  Choices :
  - Button for selecting the driving profile
  - Comfort
  - Dynamic
  - Automatic
  - Default
  
  
• Drying the brake discs
  Our cars have a brake drying system which acts each time you start the car for a fixed time.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Adaptation
  3 - Select - Drying brake discs
  4 - Activate one of four options:
  - Central (default)
  - Not activated
  - Weak
  - Strong
  
  
• Reset settings tires
  If you take time with your car and you were adjusting the pressure and want to adjust them to the factory settings, you can do so using this modification.
  1 - Module 03 - Electronic brake. Code (40168/20103)
  2 - Basic Settings
  3 - Select - Rest. Factory settings control indicator tires
  4 - Select the desired option
  - Not enabled (default)
  - Activated
  
  
• Disable Mode Transport
  1 - Module 19 - diagnosis interface for data bus. Code (20103)
  2 - Adaptation
  3 - Mode of transport
  - Off (default)
  - Activated
  
  
• Dynamic adaptation brake release
  With this mod, we can make our vehicle snatch a little more to the rally. Strong default being prevents wheel spin at the start.
  1 - Module 03 - Brake electronics. Code (40168/20103)
  2 - Adaptation
  3 - Anti-skid control in acceleration - Options: (On - Not activated)
  4 - Motor drive torque adjustment - Options: (Activated - Not activated)
  

 

[rikhartman]

Categorie MENU'S / SCHERMEN / OPTIES

• Test needle / staging mode when the ignition
  With this mod, by making contact makes the staging or test needle, is a very striking mod.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding
  3 - Byte 1
  4 - Enable Bit 0
  
  
• Chronometer in FIS \ Laptimer!
  With this mod, you will add a timer in the FIS.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding
  3 - Byte 1
  4 - Enable Bit 3
  
  
• FIS liters refueled
  With this mod, you will add the function of liters you have to refuel.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding
  3 - Byte 10
  4 - Enable Bit 4
  It shows the liters of 5 in 5. Full Deposit = 45 liters, full tank shows three stripes.
  
  
• Disable seat belt warning
  With this mod, you can disable the audible and visual warning belts.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding
  3 - Byte 1
  4 - Disable Bit 1
  Another way :
  1 - Adaptation
  2 - Select - Disable belt warning
  3 - Select one of the two options:
  - No (default)
  - Yes
  
  
• FIS oil temperature -> standaard zichtbaar in FR
  With this mod, you add the oil temperature in the FIS
  1 - Box Module 17- instruments- Code (25327)
  2 - Extended Coding
  3 - Byte 10
  4 - Enable Bit 1
  Another way :
  1 - Adaptation
  2 - Select - Display of oil temperature
  3 - Select one of the two options:
  - Yes (default)
  - Do not
  
  
• FIS Compass (Bearing browser)
  With this mod, you will add the compass in the FIS (Only if you have other browser)
  1 - Box Module 17- instruments- Code (25327)
  2 - Extended Coding
  3 - Byte 10
  4 - Enable Bit 6
  Another way :
  1 - Coding extended (Text mode)
  2 - Navigation / Compass - Switch to SI
  3 - Indicator compass --- Lower position (Change what you want)
  
  
• Digital odometers in FIS
  With this mod, you add the digital speedometer in the FIS (You have to select it on the screen of Settings)
  1 - Module 17 - Code Box instruments- (25327)
  3 - Adaptation
  4 - Select - Digital Tachometer
  5 - Select one of three options:
  - Indication
  - No indication
  - Not available
  
  
• Personal consumption adjustment Display FIS
  With this mod, you can calibrate consumption if you see that do not fit what you think.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select- Correc.del indic.de consumption / combustion scope - Options: (100%)
  4 - Change value. Default 100%
  5 - The adjustment allows increments of 1%, maximum and minimum values ​​are 85 (%) and 115 (%).
  
  
• Activated carbon background Infotainment
  With this mod, change the background screen infotainment to Carbon mode.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Extended Code (Text mode)
  3 - Byte 17 Skinning
  4 - Select Skin 3
  
  
• Change Home Screen
  With this mod, we change the screen that starts the infotainment.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Extended Coding (Text mode)
  3 - Select - Initial Screen
  4 - Select one of eight options
  - Option 1 (default)
  - Rest
  
  
• Activating Driving Mode menu Car / CAR
  With this mod, we activate a new screen infotainment. driving school mode. It is a pijada, does not show too much,
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Car Function Adaptations Gen 2
  4 - Search submenu - Menu display driving school
  5 - Change value to ON
  6 - Without leaving the submenu search - Menu display driving school over threshold
  7 - Change value to ON
  8 - Select - Car List Function CAN Gen 2
  9 - Search submenu - Driving school
  10 - Change value Available
  11 - Search submenu - Driving school bus msg
  12 - Change value comfort databus
  
  
• DRL control from the CAR menu
  With this mod, we activate a new option in Settings-lights where we can activate or deactivate the DRL.
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - Daytime Running Light
  4 - Tagfahrlicht Aktivierung oder durch BAP bedienfolge moeglich
  5 - Change value to On
  
  
• Change logo radio (FR, Cupra, Ecomotive)
  With this mod, you can change the initial logo.
  1 - Module 5F - Information Electronics 1. Code (20103)
  2 - Adaptation
  3 - Byte 18 Screenings
  Value in 0 - Seat Normal
  Value in 1 - Seat FR
  Value in 2 - Seat Cupra
  Value in 3 - Seat Ecomotive
  Value in 5 - Seat Xperience
  Value in 6 - Seat FR Line
  
  
• Rear wiper on screen
  With this mod, we activate the comfort mode back clean
  1 - Module 09 - Electronic. Code (31347)
  2 - Adaptation
  3 - wiper
  4 - Menuesteuerung konfortwischen HW
  5 - Change value to On
  
  
• Engineer mode or Green Menu
  With this mod, we activate the engineer mode. Vallais be careful not to roll.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Select CHANGE SERVICE
  3 - development mode.
  4 - Adaptation
  5 - Development Mode
  6 - Change to On.
  - Restart Infotainment
  - Hold the Menu button and hold until you exit the menu updates and not let go until you exit the menu engineer.
  
  
• Change system language
  With this mod, we can change the system language.
  1 - Module 17 - Code Box instruments- (25327)
  2 - Adaptation
  3 - Select - Language
  4 - Select language
  
  
• Menu Display Compass - OFF ROAD WITH AND WITHOUT NAVI
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Car Function Adaptations Gen 2
  4 - Search submenu - Menu compass display (ON)
  5 - Search submenu - Menu display compass over threshold (ON)
  6 - Select - Car Function List Bap Gen 2
  7 - Search submenu - Compass 0x15 (ON)
  8 - Search submenu - 0x15 Compass msg bus (data bus comfort)
  9 - Byte 24 Navigation System
  10 - Change value to On.
  This mod does not allow all functions without NAVI.
  Logically altitude and compass does not display data.
  Also reports a fault in the module 5F saying that environmental data missing
  (Only reports to do analysis with OBDeleven, nothing comes on screen)
  A normal error and do not have to worry.
  With NAVI everything works 100%
  If you want me to show the angle of rotation of the wheels on this menu you have to make the mod Slope Angle of View menu.
  
  
• Menu Display Angle of Slope - angle of rotation of the wheels
  With this modification you can add new functionality to Mod OFFROAD Display Menu.
  By itself does not work, you must have activated the OFFROAD menu.
  We will show graphically the angle of rotation of the wheels to turn the wheel.
  1 - Module 5F - Electronic Information 1. Code (20103)
  2 - Adaptation
  3 - Select - Car Function Adaptations Gen 2
  4 - Search submenu - Menu display angle of stope (ON)
  5 - Search submenu - Menu display angle of stope over threshold (ON)
  6 - Select - Car Function List Bap Gen 2
  7 - Search submenu - Angle of stope 0x24 (ON)
  8 - Search submenu - 0x24 Angle of stope msg bus (data bus comfort)
  
  
• Displays temperature
  With this mod we can change emperature degrees Celsius to Fahrenheit
  1 - Module 17 - Code Box instruments- (25327)
  3 - Extended Coding
  4 - Temperature
  5 - Select one of the two options:
  - Celsius degrees
  - Fahrenheit degrees
  
  
• Install OEM Rear Camera
  Necessary items: OEM NTSC camera, connectors for the Quadlock.
  Install the camera by connecting the original cables of the ceiling to the cables of the light of the new ceiling.
  Feed the camera directly from the cigarette lighter or from fuses.
  Connect the signal cables to the Quadlock (Blue Connector) Where the PIN 6 is the positive and the PIN 12 is the video mass.
  
  1 - Module 5F
  2 - Coding (bytes mode)
  3 - Byte 19 - Activate bit 4
  
  Another way:
  1 - Coding (text mode)
  2 - Byte 19 Rear View Low --- Set it to On
  
  
• Set / uitschakelen sound generator Alleen beschikbaar op Cupra-modellen! Aangedragen door cederieck
  
  1 - Aanpassing - Channel 10
  2 - IDE04472 -. Volume d actuator voor mechanische trillingen
  3 - Omgeving: 0,0% (Soundgeneator deakiviert) - Alternatief: elke% Enter - Standard: 100% (% waarde heeft betrekking op de sport-modus)
  4 - Stel waarde verwijst naar de sport-modus, in de normale modus, het geluid generator werkt alleen in een bepaalde relatie met de einstellten waarde (ongeveer 1/3 - 50%)
  

 

[cederieck]

kan de optie niet zien in de lijst maar bij een cupra kan je de sound generator aan passen als deze in sport staat

Heb deze ook getest en deze werkt

Voor de rest mooie lijst ga zeker eens wat uitproberen

Besturingseenheid 44 - stuurinrichting

Instellen van de besturing karakteristieke
• Aanpassing - Channel 10
• IDE04130 - kenmerken van de stuurbekrachtiging
• Omgeving: Dynamics (Leknung gedraagt zich altijd als met actieve sport-modus) - Alternatief: Comfort - Standard: normaal


Controller A9 - K?rperschallaktuator

Set / uitschakelen sound generator
• Aanpassing - Channel 10
• IDE04472 -. Volume d actuator voor mechanische trillingen
• Omgeving: 0,0% (Soundgeneator deakiviert) - Alternatief: elke% Enter - Standard: 100% (% waarde heeft betrekking op de sport-modus)
• Stel waarde verwijst naar de sport-modus, in de normale modus, het geluid generator werkt alleen in een bepaalde relatie met de einstellten waarde (ongeveer 1/3 - 50%)

 

[rikhartman]

kan de optie niet zien in de lijst maar bij een cupra kan je de sound generator aan passen als deze in sport staat

Heb deze ook getest en deze werkt

Voor de rest mooie lijst ga zeker eens wat uitproberen

Besturingseenheid 44 - stuurinrichting

Instellen van de besturing karakteristieke
? Aanpassing - Channel 10
? IDE04130 - kenmerken van de stuurbekrachtiging
? Omgeving: Dynamics (Leknung gedraagt zich altijd als met actieve sport-modus) - Alternatief: Comfort - Standard: normaal


Controller A9 - K?rperschallaktuator

Set / uitschakelen sound generator
? Aanpassing - Channel 10
? IDE04472 -. Volume d actuator voor mechanische trillingen
? Omgeving: 0,0% (Soundgeneator deakiviert) - Alternatief: elke% Enter - Standard: 100% (% waarde heeft betrekking op de sport-modus)
? Stel waarde verwijst naar de sport-modus, in de normale modus, het geluid generator werkt alleen in een bepaalde relatie met de einstellten waarde (ongeveer 1/3 - 50%)

Thnx! Zal de cupra aanpassing verwerken. Die je erboven noemt staat er al in, of heb je 'm vertaald?:-

 

[cederieck]

deze komt van een De forum en vertaald met translater Idd

 

[jeroen72]

Ben sinds 3 mnd in bezit van een seat ibiza fr dynamic tsi 1.2
Werken de instellingen voor de inklappen van de buitenspiegels hier ook voor ?

 

[rikhartman]

Ben sinds 3 mnd in bezit van een seat ibiza fr dynamic tsi 1.2
Werken de instellingen voor de inklappen van de buitenspiegels hier ook voor ?

Ha Jeroen,

Het ligt eraan.. kwestie van proberen.
Welk jaartal komt je Ibiza?

Veel plezier ermee!

 

[jeroen72]

2015.Dank je wel

 

[TurboDre]

Beste Rik,

Jij heb het volgende geprobeerd en het werkte bij jou?.

Menu Display Compass - OFF ROAD WITH AND WITHOUT NAVI
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2

Als ik bij punt 3 kom kan ik de Car Function Adaptations Gen 2 niet vinden. Ik zie deze alleen met een code ervoor en nog iets erachter.
Zie jij dit wel zo los staan of heb je iets anders geselecteerd, misschien met het nummer ervoor??.

Alvast bedankt.

Mvg

Andr?.

 

[rikhartman]

Beste Rik,

Jij heb het volgende geprobeerd en het werkte bij jou?.

Menu Display Compass - OFF ROAD WITH AND WITHOUT NAVI
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2

Als ik bij punt 3 kom kan ik de Car Function Adaptations Gen 2 niet vinden. Ik zie deze alleen met een code ervoor en nog iets erachter.
Zie jij dit wel zo los staan of heb je iets anders geselecteerd, misschien met het nummer ervoor??.

Alvast bedankt.

Mvg

Andr?.

Beste Andr?,

Ik kan me niet helemaal meer herinneren, maar volgens mij was de benaming iets anders idd.. kun je een screenshot maken, dan kijk ik even. Ik zou zeggen gewoon proberen (en goed bijhouden wat je verandert!)

Groeten,
Rik

 

[Antera]

Vermoedelijk omdat je geen GEN 2 versie hebt maar een GEN 1 versie

 

[TurboDre]

Beste Andr?,

Ik kan me niet helemaal meer herinneren, maar volgens mij was de benaming iets anders idd.. kun je een screenshot maken, dan kijk ik even. Ik zou zeggen gewoon proberen (en goed bijhouden wat je verandert!)

Groeten,
Rik

Ik zal van het weekend eens kijken.
Bedankt voor je reactie.

 

[TurboDre]

Vermoedelijk omdat je geen GEN 2 versie hebt maar een GEN 1 versie

Het zou kunnen, maar er is een Duitser met een zelfde Cupra die het ook gelukt is.
In de lijst zie alleen maar keuzes voor Gen2 en niet Gen1.
Van het weekend nog eens kijken .

Gr Andr?.

 

[Antera]

GEN 1 kan dit helaas niet en die zal je dan vermoed ik ook hebben. horen het wel

 

[TurboDre]

Het is me gelukt om de offroad functie aan te zetten maar het was wel even puzzelen .

Ik heb het onderstaande gedaan (van een Duitse site gehaald):

STG 5F (Informationselektronik) ausw?hlen

STG Anpassung -> Funktion 10
Kanal (41)-Fahrzeug Funktionsliste BAP-compass_0x15 ausw?hlen
Wert auf aktiv setzen

Kanal (81)-Fahrzeug Men? Bedienung-menu_display_compass ausw?hlen
Wert auf aktiviert setzen

Kanal (83)-Fahrzeug Men? Bedienung-menu_display_compass_over_threshold_high ausw?hlen
Wert auf aktiviert setzen

Ik heb ook de soundgeneraror aangepast.
Ik miste alleen in de lijst hierboven dat deze in module A9 zit.

Mvg, Andr?.

 

[Ibiza-6P]

Best mensen ik heb een vraag over het in en uitklappen van de spiegels (Seat Ibiza 1.0 Style Connect eind 2015)

Als ik de auto op slot zet met de AB (3sec in gedrukt houd) klappen de spiegels in.
Als ik de auto van slot haal en sleutel in contact doe en aan zet, gaan de spiegels niet uit (Maar soms wel wat raar is)

Als ik deze functie instel:
Klap spiegels automatisch in bij vergrendeling. (Zowel via AB als sleutel in deur)
Met deze aanpassing klappen de spiegels automatisch in bij het vergrendelen van de auto. Als je via AB vergrendelt, hoef je de vergrendelknop niet ingedrukt te houden.
Gebruik deze functie icm onderstaande functie, zodat je tijdens vrieskou de spiegels spaart.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Funk modus spiegelaklappung
5 - Verander waarde By command via remote control look key

Gebeurt er niks ......... wie o wie heeft of weet daar een oplossing voor

Vraag twee in car menu heb je drie opties :
● RITGEGEVENS
● ECOTRAINER
● WAGENSTATUS

ik heb ook gezien in het instructieboekje dat je een optie SPORT functie weet iemand hoe en wat

met vriendelijke groet michael