[SEAT] [Ibiza 6F] Footwell Retrofit

[o6uzh4n]

Hi everyone i am trying to make a retrofit footwell light. i did all connection to bcm but lamp not working i am trying to code bcm with vcds but nothing changed. In long coding not have a footwell lights options, i did coding for setting option for footwell on mib screen but not lights working. Which code i need to activate. Sorry for my english

 

[Antera]

Hello,

Look at your BCM iff this one does have the pin in de bcm for the footlights and other possibility is that the bcm is not ready for this option

 

[o6uzh4n]

Hello,

Look at your BCM iff this one does have the pin in de bcm for the footlights and other possibility is that the bcm is not ready for this option

I connected to bcm my footwell lights with schema but not light up. When i coding bcm i didn?t find code but bcm has a pins. BCM Number : 6c0 937 089c


Tapatalk kullanarak iPad aracılığıyla g?nderildi

 

[RoadRunnerRik]

If you can't find the right byte for coding you got probably the wrong BCM despite that the correct pin is present.

There are three options:
A: The pin is fake (present but not internally connected),
B: The wire is on the wrong pin,
C: Your BCM doesn't support foodwell.

 

[o6uzh4n]

If you can't find the right byte for coding you got probably the wrong BCM despite that the correct pin is present.

There are three options:
A: The pin is fake (present but not internally connected),
B: The wire is on the wrong pin,
C: Your BCM doesn't support foodwell.

Same bcm using on cupra 1.8 TSI and Polo 6c models and some versions of this model has a footwell

I need to bcm long coding to code my car bcm. Anyone have a same bcm with footwell ?

And how can get a schema for bcm pins maybe my bcm schema wrong ?


Tapatalk kullanarak iPad aracılığıyla g?nderildi

 

[Antera]

Maybe differend software version on the BCM. Please post autoscan and a total scan off the adaptions list from module 09 i can look into my files

 

[o6uzh4n]

Maybe differend software version on the BCM. Please post autoscan and a total scan off the adaptions list from module 09 i can look into my files

This is my autoscan also i have some error. But i dont know how to fix

Chassis Type: 6J (6C0)
Scan: 01 03 08 09 10 15 17 19 44 5F
   
03-ABS Brakes -- Status: Malfunction 0010
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
 

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 6R0-907-37x-ESP90.clb
   Part No SW: 6C0 907 379 K    HW: 6R0 907 379 BA
   Component: ESP9.0i       H03 0004  
   Serial number: 08510505150628
   Coding: 11DD287D492433C4091700720058881492CC90000005E7098F00
   Shop #: WSC 00049 770 00114
   ASAM Dataset: EV_Brake1ESP90iBOSCHPQ26 100020
   ROD: EV_Brake1ESP90iBOSCHPQ26.rod
   VCID: 377CA6788E9960FA4D-8062

1 Fault Found:
1032 - Vacuum sensor 
          C10A3 01 [009] - Electrical Failure
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 47177 km
                    Date: 2018.12.31
                    Time: 14:31:29



-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 6C0-937-089-V1.clb
   Part No SW: 6C0 937 089 C    HW: 6C0 937 089 
   Component: BCM PQ26 Hi4R H08 0084  
   Serial number: 001378095385
   Coding: 0800084040530A7B4B844000412703500001690053010000000000000000
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_BCMA0 005005
   ROD: EV_BCMA0_005_VW26.rod
   VCID: 306E9D646BF7B7C20C-8064

   Rain Light Recognition Sensor: 
   Subsystem 1 - Part No SW: 5Q0 955 559 A    HW: 5Q0 955 559 A  Labels: 5Q0-955-547.CLB
   Component: RLS  037 0059 
   Serial number: S5Y15M06D18H17M06S08
   Coding: 00984D

   Drivers Door Control Module: 
   Subsystem 2 - Part No SW: 6R0 959 801 CK    HW: 6R0 959 801 CK  Labels: 6R0-959-801.CLB
   Component: J386__TSG_FT  011 5110 
   Serial number: 13102697150707105856
   Coding: 020000

   Front Passengers Door Control Module: 
   Subsystem 3 - Part No SW: 6R0 959 802 CQ    HW: 6R0 959 802 CQ  Labels: 6R0-959-802.CLB
   Component: J387__TSG_BT  011 5110 
   Serial number: 13102696150706205924
   Coding: 020000

   Drivers Door Rear Control Module: 
   Subsystem 4 - Part No SW: 6R0 959 811 K    HW: 6R0 959 811 K
   Component: J388__TSG_HL  006 5110 
   Serial number: 13102567150706172718
   Coding: 000000

   Passengers Rear Door Control Module: 
   Subsystem 5 - Part No SW: 6R0 959 812 K    HW: 6R0 959 812 K
   Component: J389__TSG_HR  006 5110 
   Serial number: 13202566150706215011
   Coding: 000000

1 Fault Found:
922376 - Switch for Driving Profile Selection 
          B1427 29 [009] - Signal Implausible
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 47177 km
                    Date: 2018.12.31
                    Time: 14:31:43


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels: 6C0-909-901-V1.clb
   Part No SW: 6C0 909 901     HW: 6C0 937 089 
   Component: GW MQB A0     H08 0084  
   Revision: --------    Serial number: 001378095385
   Coding: 010100082008560071000000000000000001000000000000000000000000
   Shop #: WSC 12345 123 12345
   ASAM Dataset: EV_GatewA0Lear 013020
   ROD: EV_GatewA0Lear_VW26.rod
   VCID: 65C03C3064B5226A2F-8030

   Multi Function Steering Wheel Control Module: 
   Subsystem 1 - Part No SW: 5F0 959 537 B    HW: 5F0 959 537 B
   Component: E221__MFL-PR6  H04 0130 
   Serial number: 000000000B0426290715
   Coding: 002000

1 Fault Found:
1025 - invalid data record 
          B2005 00 [009] -  - 
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 47177 km
                    Date: 2018.12.31
                    Time: 14:31:29

                    Supply voltage: Terminal 30: 14.5 V
                    Terminal 15: On


-------------------------------------------------------------------------------
Address 44: Steering Assist (J792)       Labels: 6Rx-909-144-V2.clb
   Part No SW: 6C1 909 144 AG    HW: 6C1 909 144 D
   Component: EPS_TRW_ALow  312 3232  
   Serial number: CF770392
   Coding: 000700
   Shop #: WSC 00049 770 00139
   ASAM Dataset: EV_SteerAssisUDSTRW 016026
   ROD: EV_SteerAssisUDSTRW_SE26.rod
   VCID: 6DD04410BC451A2A67-8038

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels: None
   Part No SW: 5QA 035 824 A    HW: 5QA 035 824 
   Component: MU-S--ER      H24 0346  
   Serial number: SEZAZ2R0281704
   Coding: 04520000960A000011110007000908002F0301940120010006
   Shop #: WSC 12345 123 61029
   ASAM Dataset: EV_MUStd6C1TSAT 001015
   ROD: EV_MUStd6C1TSAT_SE26.rod
   VCID: 3E72B35CA1A351B28E-806A

   Operating And Display Unit 1: 
   Subsystem 1 - Part No SW: 5F0 919 604     HW: 5F0 919 604 
   Component: ABTm_Std2  H43 1031 
   Serial number: SEZ8Z9RFS0053L      

2 Faults Found:
1543 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 47177 km
                    Date: 2018.12.31
                    Time: 14:31:28

                    Voltage terminal 30: 14.3 V
                    Byte_Coding_Condition-byte_0_condition: OK
                    Byte_Coding_Condition-byte_1_condition: OK
                    Byte_Coding_Condition-byte_10_condition: ERROR
                    Byte_Coding_Condition-byte_11_condition: ERROR
                    Byte_Coding_Condition-byte_12_condition: ERROR
                    Byte_Coding_Condition-byte_13_condition: ERROR
                    Byte_Coding_Condition-byte_14_condition: ERROR
                    Byte_Coding_Condition-byte_15_condition: ERROR
                    Byte_Coding_Condition-byte_16_condition: ERROR
                    Byte_Coding_Condition-byte_17_condition: ERROR
                    Byte_Coding_Condition-byte_18_condition: ERROR
                    Byte_Coding_Condition-byte_19_condition: ERROR
                    Byte_Coding_Condition-byte_2_condition: OK
                    Byte_Coding_Condition-byte_20_condition: ERROR
                    Byte_Coding_Condition-byte_21_condition: ERROR
                    Byte_Coding_Condition-byte_22_condition: ERROR
                    Byte_Coding_Condition-byte_23_condition: ERROR
                    Byte_Coding_Condition-byte_24_condition: ERROR
                    Byte_Coding_Condition-byte_25_condition: ERROR
                    Byte_Coding_Condition-byte_26_condition: ERROR
                    Byte_Coding_Condition-byte_27_condition: ERROR
                    Byte_Coding_Condition-byte_3_condition: OK
                    Byte_Coding_Condition-byte_4_condition: OK
                    Byte_Coding_Condition-byte_5_condition: OK
                    Byte_Coding_Condition-byte_6_condition: OK
                    Byte_Coding_Condition-byte_7_condition: OK
                    Byte_Coding_Condition-byte_8_condition: OK
                    Byte_Coding_Condition-byte_9_condition: OK

7191 - Function Restricted due to Missing Message(s) 
          U1111 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 47177 km
                    Date: 2018.12.31
                    Time: 14:31:32

                    Voltage terminal 30: 14.3 V
                    BAP-BAP_Function_ID: 02 


End-------------------------(Elapsed Time: 02:31)--------------------------

Tapatalk kullanarak iPad aracılığıyla g?nderildi

 

[Odelot]

Thats not a 6f, but a 6j?

 

[o6uzh4n]

Thats not a 6f, but a 6j?

6p 2015


Tapatalk kullanarak iPad aracılığıyla g?nderildi

 

[o6uzh4n]

Maybe differend software version on the BCM. Please post autoscan and a total scan off the adaptions list from module 09 i can look into my files

This setting come to my media system after coding but not working lights



Tapatalk kullanarak iPad aracılığıyla g?nderildi

 

[vdmeddy]

I think there are not installed in your car, at my car they work properly

 

[o6uzh4n]

I think there are not instaled in jour car, ad mij car they work propperly

Photo from ibiza commercial i installed the lights to bcm but not work i think schema or coding wrong i need to true coding


Tapatalk kullanarak iPad arac*l***yla g?nderildi

 

[o6uzh4n]

i did the coding working now but when i select the footwell light on adaptasion. Menu show up on mib2 but dont work i didn't find the problem ?

 

[Rainesh]

i did the coding working now but when i select the footwell light on adaptasion. Menu show up on mib2 but dont work i didn't find the problem ?

which channels did you adapt in 09?