Kwam nog een code tegen op een Duits Ateca forum voor Trailer Assist met OBD11:
However, STG Module 76 with OBD11 instead of STG 10
1. STG module 76 (parking aid), coding
2. In byte 00 we activate bit 3.
3. Accept the change.
4. STG module 17 (dash panel insert), coding
5. In byte 12 we activate bit 5.
6. Accept the change
7. STG Module 6C (reversing camera) and go intocoding (Bytes mode).
8. In byte 10 we activate bit 3.
9. Accept the change
10. STG Module 5F (Information Electronics), Adjustment g
11. Click on the "Car_Function_ Adaptations_Gen2 " customization parameter: Enable "menu_display_trailer_assistant_over_threshold_high", enable"menu_display_trailer_assistant_after_disclamer ".12. Apply again the change
13. Now go to the customization option: "Car_Functio n_List_BAP_Gen2" Parameter: "Trailer_Assistant_0x36" enable.
14. Now we are looking for the option: "Trailer_Assi stant_msg_bus_0x36" We select the value "Terminal 15".
15.We accept the change again
Als ik de reacties moet geloven werkt t prima.
(
https://www.ateca-forum.de/index.php?thread/2241-trailer-assist-anh?ngerrangierassistent/&pageNo=9)
Verstuurd vanaf mijn SM-G960F met Tapatalk